Icom IC-R75 Instruction Manual
Also see for IC-R75: Price listInstruction manualInstruction manualService manual
                                                | |
Contents
| 
■ Function displayq TIMER INDICATOR (p. 28)Appears when power on/off timer or sleep timer isin use.w DSP UNIT INDICATOR (p. 35)Appears when an optional UT-106 DSP UNIT isinstalled.e AUTOMATIC NOTCH FILTER INDICATOR (p. 20)Appears when the optional automatic notch filter isin use.r NOISE REDUCTION INDICATOR (p. 20)Appears when the optional noise reductionfunction is in use.t LOCK INDICATOR (p. 13)Appears when the dial lock function is in use.y SIGNAL METER➥ Shows the relative receive signal strength.➥ Shows the S-meter squelch level when used.u PREAMP INDICATOR (p. 16)Appears when antenna preamp-1 or preamp-2 isin use.i ATTENUATOR INDICATOR (p. 16)Appears when the attenuator function is in use.o ANTENNA INDICATORS (p. 16)Indicate which antenna connector is in use.!0 NOISE BLANKER INDICATOR (p. 15)Appears when the noise blanker function is in use.!1 SCAN INDICATOR (p. 25)➥ Appears when scan or priority watch is activated.➥ Flashes when scan or priority watch is paused.!2 AGC INDICATORS (p. 16)➥ “AGC” appears when slow AGC time constant isselected.➥ “F.AGC” appears when fast AGC time constantis selected.➥ “AGC OFF” appears when the AGC function isturned OFF.➥ “F.AGC” blinks while scanning or while usingband scope via an optional RS-R75.!3 MEMORY MODE INDICATOR (p. 21)Indicates memory mode is selected.!4 VFO MODE INDICATORIndicates VFO mode is selected.!5 MEMORY CHANNEL NUMBER READOUT(p. 21)➥ Shows the selected memory channel number.➥ “S” appears when the displayed memor ychannel is designated as a select memorychannel.!6 BLANK MEMORY INDICATORShows that the displayed memory channel is notprogrammed.• This indicator appears both in VFO and memory modes.!7 FREQUENCY READOUTShows the operating frequency.!8 RECEIVE INDICATORAppears while receiving a signal or when thesquelch is open.!9 MODE INDICATORS (p. 14)Indicate the selected operating mode.@0 REVERSE MODE INDICATOR (p. 17)Indicates a reverse operating mode is selected.@1 WIDE/NARROW FILTER INDICATORS (p. 18)➥ “ç” appears when the wide IF filter is selected.➥ “ã ” appears when the narrow IF filter isselected.52PANEL DESCRIPTIONDSPBLANKBLANKSRTTYPREAMPTIMERS1 3 5 7 9 20 40 60 dBF.AGC OFFANTATTLSBUSBCW S - AMFMREVNWANFNRLOCKR XMEMOSCANN B VFO1 12 2qwertyu i o !0 !1 !2 !3 !4!5!6!7!8!9@0@1 |
Related manuals for Icom IC-R75
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine