Icom IC-T7H Instruction Manual

Also see for IC-T7H: Instruction manual Service manual

4ADVANCED FUNCTIONS19➀ Push [MR] to select memory mode.➁ While pushing [(BAND)SCAN] rotate the tuning dial toselect the desired band.➥ The following scan bands are selectable:• “SEL ALL” for all channel scan.• “SEL 144” for selected band scan of the 144 MHz band.• “SEL 430” or “SEL 440” for selected band scan of the430(440) MHz band, depending on version.➥ After releasing [(BAND)SCAN], the selected scan starts.➥ To activate the previously selected scan, dial rotation isnot necessary—just push [ (BAND)SCAN] for 1 sec.➥ During scan, the following can be changed:• Scan range using [(BAND)SCAN], with/without [DIAL].• Scan direction using [DIAL].➂ To stop the scan, push [(VFO) CLR].D Memory (skip) scanALL CHANNEL SCAN: Repeatedly scans all programmedmemories, except for those set as skip channels.BAND SELECT SCAN: Repeatedly scans all memories withprogrammed frequencies in the 144 MHz band or 430(440)MHz band, except for those set as skip channels.ALL CHANNEL SCANBAND SELECT SCAN (Example: 144 MHz band)Not yetprogrammedSKIPMch 1 Mch 7Mch 2 Mch 3 Mch 4UHFUHF VHFVHFVHFVHFVHFVHFVHFUHFMch 5 Mch 6Mch 8Mch 9Mch 60 Mch 11 Mch 10Not yetprogrammedSKIPMch 1 Mch 7Mch 2 Mch 4Mch 3 Mch 5 Mch 6Mch 8Mch 60 Mch 11 Mch 10 Mch 9