Icom IC-T7H Instruction Manual

Also see for IC-T7H: Instruction manual Service manual

4 ADVANCED FUNCTIONS20D Scan resume conditionThe resume condition can be selected as a pause or timerscan. This setting is common for all scans.When receiving a signal, pausescan pauses until the signaldisappears; timer scans paus-es for 10 sec.➀ Push [(H/L)SET] for 1 sec. to enterset mode.➁ Push [H/L] or [TONE] one or moretimes until “SC” appears.➂ Rotate [DIAL] to select the desiredscan resume condition.• “T-10”: scan pauses for 10 sec. on areceived signal.• “P-02”: scan pauses on a received signal until it disappears.➃ Push [(VFO) CLR] to exit set mode.D Setting a skip channelMemory channels can be set to be skipped during memoryscan. This is useful to speedup the memory scan interval.➀ Select the memory channel to be programmed as a skipchannel:➥ Push [MR] to select memory mode.➥ Rotate [DIAL] (or use the keypad) to select a memorychannel.➁ Push [(MR) SKIP] for 1 sec. to setthe memory channel as a skipchannel.• “SKIP” appears.➂ Repeat step ➁ to cancel a skipchannel.• “SKIP” disappears.RUSING SET MODEMRSKIPMRNOTE: Scan edge channels, 1A to 4B, cannot be set toshow “SKIP” settings, however, they will be skipped dur-ing memory scan.PausescanReceivinga signalTimerscan10 sec. 2 sec.