Icom ID-31A PLUS Advanced Manual

Also see for ID-31A PLUS: Manual Manual Basic Manual

Icom ID-31A PLUS Advanced Manual Manual pdf 121 page image

8 SCANNING8-2Scanning is a versatile function that can automaticallysearch for signals A scan makes it easier to locatestations to contact or listen to, or to skip unwantedchannels or frequenciesD Duplex (DUP) scanThe Duplex scan searches for signals in bothTX and RX frequencies that are used in duplexoperation(p 10-4)See pages 8-4, 8-9, or 8-10 for its operationL “DUP–” or “DUP+” is displayed in the DuplexmodeL A Duplex scan does not start when thefrequency offset is set to “0000 MHz”D Tone scanThe Tone scan searches for signals in tonefrequencies or DTCS codes that are used bystations using the Tone Squelch functionSee pages 8-4, 8-9, or 8-10 for its operationL A Tone scan is usable in any VFO, Memory, orCall channel modeL During a scan, rotate [DIAL] to change the scandirectionSee “Tone squelch operation” or “DTCS codesquelch operation” for details (pp 12-9, 12-10)D VFO scanALL (Full scan)Repeatedly scans the entire bandID-31A/E PLUSRX frequencylower endID-31A/E PLUSRX frequencyupper endScanJumpP SKIPP SKIPPROG 0 ~ 24 (Program scan)Scans the Program Scan Edge channel(00A/00B ~ 24A/24B) range (p 8-5)ScanJumpJumpScan rangeLoweredge(XXA)Upperedge(XXB)L At least one pair of Program Scan channel mustbe entered to start a Program scanP-LINK 0–9 (Program Link scan)Sequentially scans the Program Scan Edgechannel ranges The links are set on the MENUscreen (MENU > Scan > Program Link)See page 8-6 for more details...Program Link 0：1：9：Edit Name00：430.000−450.000Program Link number (0 to 9)BlankA pair ofProgram Scan Edge channelsDeleteProgram Scanlower edge(XXA)Program Scanupper edge(XXB)D Memory scanALL (Memory Full scan)Scans all Memory channelsMODE (Mode Memory scan)Scans Memory channels that are entered with thesame receiving mode as the currently selectedmodeD Memory Bank scanALL (Full Bank scan)Scans all BanksBANK-LINK (Bank Link scan)Sequentially scans the Banks that are set to link onthe MENU screen (p 11-5)(MENU > Scan > Bank Link)BANK-A–Z (Bank scan)Scans the Memory channels in the selected BankScan type