12 OTHER FUNCTIONS12-3The Voice TX function transmits the recorded audiothat is on the microSD card, one time or repeatedly,for up to 10 minutes at the set interval�This function is convenient to repeatedly call CQ, orfor other events�You can assign the [Voice TX] key function to anoptional microphone key� (p� 13-4)NOTE: BE SURE to insert a microSD card into thetransceiver�Voice TX functionD Recording the voice audioMENU > Voice TX > Record1� Push [MENU]�2� Select “Voice TX�”3� Select “Record�”▼4� Hold down [PTT] to record�DisplayedwhilerecordingRecordingtimeAudio levelL Hold the microphone 5 ~ 10 cm (2 ~ 4 inches) fromyour mouth, then speak at your normal voice level�L The maximum record time is 1 minute.L Only 1 voice memory can be recorded�TIP: On the VOICE TX RECORD screen,push [QUICK], then select “Clear” to clear therecorded audio�5� Push [ENT] to confirm the recorded voice�• The voice is played back�L If you hold down [PTT], the recording starts again�In this case, the previous recorded audio will beoverwritten�L To exit the MENU screen, push [MENU] severaltimes�[ENT][Down][Up]