Icom ID-31A PLUS Advanced Manual
Also see for ID-31A PLUS: ManualManualBasic Manual
                                                                                                                                                                                                                                   | |
Contents
| 
11MENU SCREEN11-4DUP/TONE itemsOffset frequency (Default: 5.000.00)MENU > DUP/TONE��� > Offset FreqSet the frequency offset for Duplex (repeater)operation to between 0�000�00 and 59�995�00 MHz�L Push [V/MHz] to select the 1 MHz or 10 MHz tuning step�L The Duplex shift direction (DUP–/DUP+) (p� 10-4) or thetuning step is set in the Quick Menu window�L When the DR function is ON, editing is disabled�Repeater Tone (Default: 88.5)MENU > DUP/TONE��� > Repeater ToneSelect a CTCSS tone frequency for repeater accessand other functions�You can select 50 tone frequencies (67�0 ~ 254�1 Hz)�TSQL Freq (Default: 88.5)MENU > DUP/TONE��� > TSQL FreqSelect a CTCSS tone frequency for the Tone Squelchor the Pocket Beep function�You can select 50 tone frequencies (67�0 ~ 254�1 Hz)�• Selectable Repeater Tone/TSQL frequencies(Unit: Hz)67�069�371�974�477�079�782�5085�4088�5091�5094�8097�4100�0103�5107�2110�9114�8118�8123�0127�3131�8136�5141�3146�2151�4156�7159�8162�2165�5167�9171�3173�8177�3179�9183�5186�2189�9192�8196�6199�5203�5206�5210�7218�1225�7229�1233�6241�8250�3254�1Tone Burst (Default: OFF)MENU > DUP/TONE��� > Tone BurstTurn the Tone Burst function ON or OFF in the FMmode when using the Tone Squelch function�• OFF: When you transmit a signal that superimposesthe CTCSS tone, the other station may heara short burst of noise from their receiver, justafter you stop transmitting�• ON: When you transmit a signal that superimposesthe CTCSS tone, the function mutes thenoise from being heard in the other station’sreceiver�DTCS Code (Default: 023)MENU > DUP/TONE��� > DTCS CodeSelect a DTCS (both encoder/decoder) code for theDTCS Squelch�You can select a total of 104 codes (023 ~ 754)�• Selectable DTCS codes023025026031032036043047051053054065071072073074114115116122125131132134143145152155156162165172174205212223225226243244245246251252255261263265266271274306311315325331332343346351356364365371411412413423431432445446452454455462464465466503506516523526532546565606612624627631632654662664703712723731732734743754DTCS Polarity (Default: Both N)MENU > DUP/TONE��� > DTCS PolaritySelect the DTCS polarity to use for transmitting (TX)and receiving (RX)�• Both N: Normal polarity is used for both TX and RX.• TN-RR: Normal polarity is used for TX, Reversepolarity for RX�• TR-RN: Reverse polarity is used for TX, Normalpolarity for RX�• Both R: Reverse polarity is used for both TX and RX.DTCS code’s polarity for transmitting or receiving canbe independently set with this item�Digital Code (Default: 00)MENU > DUP/TONE��� > Digital CodeSelect the digital code for Digital Code Squelch�You can select a total of 100 codes (00 ~ 99)�NOTE: The default settings shown below are for the USA transceiver version� The default settings may differ,depending on your transceiver version� To return to your transceiver version’s default settings, see page 11-3� |
Related manuals for Icom ID-31A PLUS
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine