Icom ID-31A PLUS Advanced Manual

Also see for ID-31A PLUS: Manual Manual Basic Manual

Icom ID-31A PLUS Advanced Manual Manual pdf 72 page image

5 GPS OPERATION5-5Checking your positionYou can check your current position.This section is described using received position data.L The screens are just examples.D Displaying Position Data1� Push [QUICK] in the standby mode.2� Select “GPS Position.”3� Rotate [DIAL].• My screens (MY), received screens (RX), the GPSMemory channel screen (MEM), and the GPS Alarmchannel screen (ALM) are displayed.↑The displayed icon depends on the type ofscreen (MY, RX, MEM, or ALM).L To exit the MENU screen, push [MENU].[ENT][Down][Up]NOTE: Latitude, longitude, and altitude data maydiffer, depending on your received GPS signal.TIP:• If you transmit with the GPS POSITION screenopen, the screen is temporarily canceled. Tocheck the position, push [QUICK], then select“GPS Position” while transmitting.• On the MY screen or RX screen, you can enterthe displayed position information in a GPSMemory by pushing [QUICK] and selecting “GPSMemory.”• See page 5-20 about the GPS Memory functionand see page 5-25 about the GPS Alarm functionto know more details.