2 USING A microSD CARD2-4■ Removing the microSD cardTurn OFF the power.qLift OFF the [micro SD] slot cover on the side panel.wPush in the microSD card until a click sounds, andethen carefully pull it out.• DO NOT touch the terminals.Firmly close the [micro SD] slot cover.rCAUTION:After a microSD card isinserted, firmly close the[micro SD] slot cover asshown to the right.WrongCorrectClose the cover,leaving no gap.If removing the microSD card while the transceiver’spower is ON, by doing the following steps.Push [MENU]q .Push D-pad(w ) to select the root item (“SD Card”),and then push D-pad(Ent).D-pad(�)(Ent)Push D-pad(e ) to select “Unmount,” and then pushD-pad(Ent).• The confirmation screen “Unmount OK?” appears.Push D-pad(r ) to select “YES,” then push D-pad(Ent)to unmount.When the unmounting is completed, “Unmount istcompleted.” is displayed, then the screen automati-cally returns to the SD CARD menu.Push [MENU]y to exit the MENU screen.Lift OFF the [micro SD] slot cover on the side panel.uPush in the microSD card until a click sounds, andithen carefully pull it out.• DO NOT touch the terminals.Firmly close the [micro SD] slot cover.oSlot cover Slot coverPush the microSDcard until a clicksounds.Pull the microSDcard out.
