|
9 D-STAR OPERATION 9-20Digital squelch functions (Continued)■D The digital code squelch settingHold downq for 1 second.• The DR mode is selected.• To use the digital call sign squelch function in anothermode, push [V/MHz] or [M/CALL] to select theVFO, Memory, or CALL channel mode.Push [QUICK]w .Push D-pad(e ) to select “DSQL,” and then push D-pad(Ent).D-pad(�)(Ent)Push D-pad(r ) to select “CSQL S” or “CSQL.”• CSQL S : Turn ON the digital code squelch pocketbeep.• CSQL : Turn ON the digital code squelch.Push D-pad(Ent) to set the digital code squelch, andtthen exit the quick menu screen.• “CSQL S” or “CSQL” appears.Push [MENU]y .Push D-pad(u ) to select the root item (“DUP/TONE...”), and then push D-pad(Ent).Push D-pad(i ) to select “Digital Code,” and thenpush D-pad(Ent).Rotate [DIAL] to select a digital code between 00oand 99 for the digital code squelch function.!0 Push [MENU] to save, and exit the MENUscreen.!1 When the received signal includes a matching code,the squelch opens and the audio is heard.• When the received signal’s code does not match, thedigital code squelch does not open; however, the S/RFmeter shows the received signal strength.NOTE: While operating in the low-speed data com-munication mode, the digital code squelch openseven if receiving a signal does not match to yourdigital code.D Pocket beep function with the digitalcode squelchWhen a received signal matches your digital code, thetransceiver sounds beep tones for 30 seconds and“S” blinks.Push [PTT] to answer, or push D-pad(Ent) to stop➥the beeps or “S” blinking.• “S” disappears.If no operation is performed for 30 seconds, the beeptones automatically stop, but “S” continues to blinkto inform you of a call.AppearsBeep, Beep, Beep...• When “CSQL S” is selected
|
