|
9 D-STAR OPERATION 9-23D New repeater programmingRepeater group selection1.q Push [MENU] .w Push D-pad() to select the root item (“DV Memo-ry”), and then push D-pad(Ent).D-pad(�)(Ent)e Push D-pad() to select “Repeater List,” and thenpush D-pad(Ent).• The repeater groups are displayed.r Push D-pad() to select the desired repeater groupto be programmed, and then push D-pad(Ent).• The repeater list of the selected repeater group is dis-played.t Push [QUICK] .y Push D-pad() to select “Add,” and then push D-pad(Ent).• The REPEATER LIST EDIT screen is displayed.Required items for the communication casesDRepeater listcontentsUsed asan accessrepeaterUsed as adestinationrepeaterUsed for asimplex com-municationNAME – – –SUB NAME – – –CALL SIGN ✔ ✔ This item MUSTbe blank.GW CALLSIGN✔(For Gateway call) ✔ –GROUP – – –USE(FROM) ✔ – ✔FREQUENCY ✔ – ✔DUP ✔ – This item MUSTbe set to “OFF.”OFFSET FREQ ✔ – –POSITION – – –LATITUDE – – –LONGITUDE – – –UTC OFFSET – – –☞ Continued on the next page.* When you want to add a new repeater by editing a pro-grammed repeater memory contents, select “Edit.” In thiscase, after programming, be sure to select “<>.”If you select “<>,” the original repeater pro-grammed contents are overwritten.■ Repeater list programmingThis section describes how to manually program newrepeater into the repeater list.The required setting items differ, depending on the re-peater use. Be sure to confirm the required items, asshown to the right.NOTE: To program a repeater into the repeater list,the repeater’s call sign MUST be entered.Select*
|
