|
9 D-STAR OPERATION 9-13Automatic Reply function (Continued)■D Auto Position Reply functionWhen you receive a call addressed to your own callsign, but are in a situation that makes it difficult to oper-ate the transceiver, this function automatically replieswith your own call sign and transmits your position.After receiving the Auto Position Reply call, the desti-nation screen shows your position.The D-STAR product other than the ID-51 do not showthe position after receiving a call.Your position is auto-wmatically transmitted.A call addressed toqyour own call sign.YourstationDestination(ID-51)After receiving, theescreen shows theposition.Scrolls your call signor the TX message.• Your status messagemay be displayed. After receiving the Auto Posi-tion Reply call, the destinationscreen shows your position.• When no valid position is receivedAfter receiving a call addressed to your own call sign,even if “OFF” or “Manual” is set in “GPS Select,” theinternal GPS receiver is temporarily turned ON for ap-proximately 5 seconds to receive your position.Then, the transceiver automatically replies with a mes-sage, as described below.When the internal GPS receiver is temporarily turnedON, and valid data is received, the transceiver auto-matically replies if a call addressed to your own callsign is received again.• Reply message list when no valid position is re-ceivedMessage StatusNo Position When no position is receivedOld Position 2 minutes or more has passed sincereceiving the position.No Posi & GPS Start The internal GPS receiver is tem-porarily turned ON, but has not re-ceived the position yet.Old Posi & GPS Start The internal GPS receiver is tem-porarily turned ON, and 2 minutesor more has passed since receivingthe position.NOTE:• When “External GPS” is set in “GPS Select,” andif the external GPS receiver is not connected, theinternal GPS receiver will be activated.• The position transmission is based on the GPStransmission mode. (p. 16-40)• When the settings of GPS transmission mode areincorrect for the Automatic Reply function, the trans-ceiver automatically correct them to reply a call.• When the GPS transmission mode is OFF, “GPS-A”is automatically selected.Scrolls yourmessageAfter receiving the Auto PositionReply call, the destination screenshows your message.
|
