134 BASIC OPERATIONCall channel programming■You can program the Call channel with your most often-usedchannel in each channel group for quick recall.Select the desired channel group (INT, USA or CAN) to beqprogrammed. (p. 10)w Push [MENU].e Rotate dial or push [Ω]/[≈] to select the “RADIO SET” iconand then push the softkey below the icon.• RADIO SETTINGS menu is displayed.r Rotate dial or push [∫]/[√] to select “CALL CHAN,” andthen push [ENT].t Rotate dial or push [∫](CH)/[√](CH) to select a channel.y Push [ENT] to program the displayed channel as the Callchannel.• Push [CLEAR] to cancel.Channel name programming■Each channel can be assigned a unique alphanumeric ID ofup to 10 characters.Capital letters, 0 to 9, some symbols (! " # $ % & ' ( ) * + , – ./ [ \ ] ^ _ : ; < = > ?) and a space can be input.Push [q ∫](CH) or [√](CH) to select a channel.• First, cancel the Dualwatch, Tri-watch or Scan function, if acti-vated.Push [NAME] to open the channel name programmingwscreen.• A black cursor is displayed on the first character.Enter the desired channel name in the following manner:e• Select a desired character using [∫]/[√]/[Ω]/[≈].• Push [ENT] or dial to set it.• To move the cursor, rotate dial or select either arrow, “←” or “→,”then push [ENT] or dial.• Select “SPACE,” then push [ENT] to input a space.• Select “DELETE,” then push [ENT] to delete a character.• Push [CLEAR] to cancel and return to the previous screen.