207DSC OPERATION12345678910111213141516D Programming Group IDEnter “GROUP ID” in the DSC SETTINGS menu.qPush [ADD].w• The “GROUP ID” program screen is displayed.e Enter a desired group ID in the following way:• Select a desired number using [Y]/[Z]/[Ω]/[≈].• Push [ENT] or dial to set it.• To move the cursor, rotate dial or select either arrow, “←” or “→,”then push [ENT] or dial.The first digit is fixed as ‘0’ for a Group ID.The first two digits are ‘0’ for any Coast station ID.r Repeat step e to input the specific 9 digits group code.t After entering the 9 digit code, push [ENT] or dial to set it.• The Group ID name programming screen is displayed.Enter a desired 10 digit ID name in the following way:y• Select a desired character using [Y]/[Z]/[Ω]/[≈].• Push [ENT] or dial to set it.• To move the cursor, rotate dial or select either arrow, “←” or “→,”then push [ENT] or dial.• Push [123] then [!$?] then [ABC] to select a character group.After entering the ID name, select “FINISH” using dial oruY]/[Z]/[Ω]/[≈], then push [ENT] or dial to program it.• The “GROUP ID” list screen is displayed.i Push [MENU] to exit the MENU screen.MENU ➪ DSC SET ➪ Group ID(Push [MENU]) (Select icon) (Rotate dial, then push [ENT].)
