287CHAPTER CONTINUED12345678910111213141516Transmitting DSC calls■To ensure correct operation of the DSC function, makesure you correctly set the CH70 SQL Level. (p. 71)Transmitting an individual callDThe Individual call function allows you to transmit a DSC sig-nal to only a specific station.Enter “INDIVIDUAL CALL” in the DSC CALLS menu.qMENU ➪ DSC ➪ Individual Call(Push [MENU]) (Select icon) (Rotate dial, then push [ENT].)Select the desired pre-programmed individual address, orw“Manual Input,” using dial or [Y]/[Z], then push [ENT].• The ID code for the Individual call can be set first. (p. 19)• When “Manual Input” is selected, set a desired 9 digit MMSI IDcode for the individual you wish to call.About Manual Inputting:Enter a desired individual ID in the following way:• Select a desired number using [Y]/[Z]/[Ω]/[≈].• Push [ENT] or dial to set it.• To move the cursor, rotate dial or select either arrow, “←” or “→,”then push [ENT] or dial.• The first digit is specified as ‘0’ for a Group ID. If a Group ID isentered, an error beep sounds after pushing [FINISH].• The first two digits are ‘0’ for any coast station ID.NOTE: When a coast station is selected in step w, thevoice channel is automatically specified by the coast sta-tion. Therefore, skip step e and go directly to step r.+ Continued on the next page.
