577 DSC OPERATIONReceiving an Individual CallDWhen an Individual Call is received:➥ The alarm sounds for 2 minutes.➥ “RCVD INDIVIDUAL CALL” appears. The LCD backlightmay blink for 2 minutes, depending on the received Cat-egory.q Push [ALARM OFF] to stop the alarm and the blinkingbacklight.• Even if you do not push [ALARM OFF], the alarm stops after 2minutes, and then the screen in step w is displayed.w Push a softkey to select your desired action.[IGN]➥ Push to ignore the Call and return to the normal operatingmode.• The transceiver exits the DSC mode.• The Call is stored in the Received Call Log.• The “ ” icon continues to blink and the Call is stored in theReceived Call Log.[INFO]➥ Push to display the Received call information. (p. 65)[ACK]➥ Push to display the “INDIVIDUAL ACK” screen to re-ply to the Call, and select the channel specified by thecalling station for voice communication, depending onyour situation. See page 31 for details of the IndividualAcknowledgement procedure.When “INDIVIDUAL ACK” is set to “Auto (Unable),” thetransceiver automatically replies to the Call. In that case,both the TX and RX calls are stored in the Transmitted andReceived Call Logs.
