707DSC OPERATION12345678910111213141516D DSC Data OutputSelect an option for the DSC Data Output function.When receiving a DSC call, this function makes the trans-ceiver send the DSC data from its NMEA Output port to aconnected device.q Enter “DSC DATA OUTPUT” in the DSC Settings menu.MENU ➪ DSC SET ➪ DSC Data Output(Push [MENU]) (Select icon) (Rotate dial, then push [ENT].)w Rotate dial to set the DSC Data Output function to “All Sta-tion,” “List Station” or “OFF,” then push [ENT].• Push [BACK] to cancel and return to the DSC Settings menu.(default)All Stations: Outputs the call from any vessel from theNMEA Output port.Station List: Outputs the call from any vessels listed on theIndividual ID screen.OFF: Does not output any call to the external equip-ment.Push [EXIT] to return to the normal operating mode.eD Alarm StatusSet the Alarm function ON or OFF, depending on the Cat-egory or Status.q Enter “ALARM STATUS” in the DSC Settings menu.MENU ➪ DSC SET ➪ Alarm(Push [MENU]) (Select icon) (Rotate dial, then push [ENT].)w Rotate dial to select the status, then push [ENT].• Push [BACK] to cancel and return to the DSC Settings menu.• “ Safety,” “Routine,” “Warning,” “Self-Terminate” and “Discrete” areselectable. (default: ON)Rotate dial to set the Alarm setting to “ON” or “OFF.”ePush [EXIT] to return to the normal operating mode.r