JAI AM-800CL User Manual
Also see for AB-800CL: User manual
                                                                    | |
Contents
| 
AM-800CL / AB-800CL- 14 -5.2 Camera Link interfacePort/Signal 2-tap 1-tap Pin No.8bit 10bit 12bit RGB 8-bitPort A0 TAP A0 TAP A0 TAP A0 R0 Tx0Port A1 TAP A1 TAP A1 TAP A1 R1 Tx1Port A2 TAP A2 TAP A2 TAP A2 R2 Tx2Port A3 TAP A3 TAP A3 TAP A3 R3 Tx3Port A4 TAP A4 TAP A4 TAP A4 R4 Tx4Port A5 TAP A5 TAP A5 TAP A5 R5 Tx6Port A6 TAP A6 TAP A6 TAP A6 R6 Tx27Port A7 TAP A7 TAP A7 TAP A7 R7 Tx5Port B0 TAP B0 TAP A8 TAP A8 G0 Tx7Port B1 TAP B1 TAP A9 TAP A9 G1 Tx8Port B2 TAP B2 TAP A10 G2 Tx9Port B3 TAP B3 TAP A11 G3 Tx12Port B4 TAP B4 TAP B8 TAP B8 G4 Tx13Port B5 TAP B5 TAP B9 TAP B9 G5 Tx14Port B6 TAP B6 TAP B10 G6 Tx10Port B7 TAP B7 TAP B11 G7 Tx11Port C0 TAP B0 TAP B0 B0 Tx15Port C1 TAP B1 TAP B1 B1 Tx18Port C2 TAP B2 TAP B2 B2 Tx19Port C3 TAP B3 TAP B3 B3 Tx20Port C4 TAP B4 TAP B4 B4 Tx21Port C5 TAP B5 TAP B5 B5 Tx22Port C6 TAP B6 TAP B6 B6 Tx16Port C7 TAP B7 TAP B7 B7 Tx17LVAL Tx24FVAL Tx25DVAL Tx26EEN Tx235.3 Interface circuits5.3.1 Iris video outputThis signal can be used for lens iris control in Continuous andtrigger-dump modes.The signal for iris video output is taken from the video signal afterthe gain control. The signal is 1.0 V p-p (with H-sync) from 75 without termination.The iris video signal is composed to average the video level in the center area of each frame and canbe output as a composite signal with H-sync. As shown in the following figure, each frame has itsown video level which is averaged.Fig. 7. Iris videoＤＡC１μ１Ｋ２Ｋ２０．１μ＋５ＶIRIS Video Out |
Related manuals for JAI AB-800CL
manualsdatabase
Your AI-powered manual search engine