JBL MA7100HP Owner's Manual

MA7100HP | MA9100HP Owner's Manual | rev1.3 20240612 Pg 12 of 45©2024 Harman International | Features, Specifications, and Appearance subject to change without notice.BLUETOOTH OPERATIONConnecting your phone or tablet:• Select the Bluetooth input on the AVR for Bluetooth pairing of a source device. Push and Hold the Input knob toinitiate Pairing Mode.• To pair your Bluetooth source device, open the Bluetooth settings on your source device and scan forMA7100HP/MA9100HP ###### from the list. Each product has a unique ID.1. Rotate Input Carousel2. Push to Select “Bluetooth”3. Push and Hold to activate Pairing Mode4. Open the Bluetooth settings on your phone/tablet.Scan for MA7100HP/MA9100HP ###### and selectfrom the list. Each product has a unique ID.Rotate to Control VolumePush to Mute/Unmute• The AVR can recall 7 device pairings. If 7 are in memory already, the oldest will be replaced.• Because portable devices often have a volume slider. Upon pairing, there is a default volume setting in the amplifier toprevent excessive volume output being selected accidentally. The default is 20.Connecting your wireless headphones:• To pair Bluetooth headphones, press on the remote control to access the TOP MENU and select Audio.• Scroll down and select Bluetooth Setup.• Once in the Bluetooth Setup menu, set Mode to “Transmit”.• Next, scroll down and select “Transmit Pairing” and select “Search” to start searching for Bluetooth devices.• Your headphone must be in pairing mode to be discovered and paired.• When you see “searching…” pairable Bluetooth devices will be listed. Scroll down to pair new Bluetooth device.• Bluetooth headphones cannot be used with the Bluetooth input.