JBL MA7100HP Owner's Manual

MA7100HP | MA9100HP Owner's Manual | rev1.3 20240612 Pg 6 of 45©2024 Harman International | Features, Specifications, and Appearance subject to change without notice.REMOTE CONTROL1 STANDBY ON/OFF BUTTONActivates and deactivates standby modewhen the Receiver is connected to ACpower.2 MENU NAVIGATION/SELECT ANDTRANSPORT CONTROL*The Navigation keys steer the cursor inSetup menus or on-screen menus.Press center button to Select.3 MENU BACK & MENU ON/OFFThe Menu button displays the unit’s setupmenu on the On-Screen Display and frontpanel of the device.Use the Back button to go navigate toprevious page(s).4 DIM FRONT PANEL DISPLAYThis switches the display brightnessbetween bright/dim/off.5 SOURCE UP/DOWNTo select an input source, press the Source or  buttons until that source is shownon the front panel or On-Screen Display.Press SELECT to Select.6 VOLUME UP/DOWNUse the volume controls on the remote toadjust the volume of the Receiver.7 SURROUND MODE CYCLESelects between stereo and the availablesurround modes for the current source.8 MUTEMutes all audio outputs.*Use Select, and Left/Right curser buttons on the remote control as transport keys for Bluetooth and Network Audio streaming sourcesNotes on batteries:• Incorrect use of batteries can result in hazards such as leakage and bursting.• Do not mix old and new batteries together.• Do not use non-identical batteries together – although they may look similar, different batteries may have different voltages.• Ensure the plus (+) and minus (-) ends of each battery match the direction indicated in the battery compartment.• Remove batteries from equipment that is not going to be used for a month or more.• When disposing of used batteries, please comply with governmental or local regulations that apply in your country or area.13572486