JBL MA7100HP Owner's Manual

MA7100HP | MA9100HP Owner's Manual | rev1.3 20240612 Pg 23 of 45©2024 Harman International | Features, Specifications, and Appearance subject to change without notice.SPEAKER SETUPThe settings on this page define your speaker configuration and adjustment setting based on their performance and placementin the room. These settings are applied to all audio inputs and are stored in memory and recalled each time the unit ispowered up.Speaker Types - Define the types of loudspeakers you have connected in your configuration. Here you set the type ofspeakers that you have connected to your Receiver.Large Capable of full frequency range reproduction.Small Not capable of full frequency range reproduction at the low frequency end.None Speaker not present in your configuration.Note: It is not possible to set all speakers to Small unless there is a subwoofer in your speakerconfiguration. If you do not have a subwoofer, you will be forced to set your front speakers to Large.⃞Rear Configuration (MA7100HP) - It is possible to assign your rear surround amplifier channels to Top Front or TopMiddle for a Dolby Atmos speaker configuration.In addition, the rear surround amplifier channels can be assigned to provide a stereo downmix of the Main zone to asecondary location of the home, called Party mode. You can also assign these channels to bi-amp the front left/rightchannels.MA7100HP amplifier assignments:Back Panel Output LabelsFixedFrontCenterSurroundAssignable Rear Surround Top Front Top Middle Party Bi-Amp