JBL MA7100HP Owner's Manual

MA7100HP | MA9100HP Owner's Manual | rev1.3 20240612 Pg 5 of 45©2024 Harman International | Features, Specifications, and Appearance subject to change without notice.Product OverviewFRONT PANEL1 STANDBY ON/OFF BUTTONActivates and deactivates standby modewhen the Receiver is connected to ACpower.When in standby mode, the display is blankand the front panel LED glows orange.While switched on, the front panel LED willglow white.2 INPUT DIAL/MENU NAVIGATION/PRESSSELECTRotate to select an input source until thatsource is shown on the front panel. Press toselect.Use to navigate and steer the cursor inSetup menus or on-screen menus.Press to Select.3 UNIT DISPLAYThe display window shows the currentlyselected source and current volume setting.The front panel display is also used for unitsetup after pressing the MENU key on thefront panel or remote.4 BACK MENU BUTTONUse the Back button to go navigate toprevious page(s) in Setup menus or on-screen menus.5 SHOW/HIDE MENU BUTTONThe Menu button displays the unit’s setupmenu on the On-Screen Display and frontpanel of the device.6 DIM BUTTONThis switches the display brightnessbetween bright/dim/off.7 SURROUND MODE CYCLESelects between stereo and the availablesurround modes for the current source.8 VOLUME DIAL/PRESS MUTERotate to adjust the volume of the Receiver.Press to mute all audio outputs.5 612 34 78