JCG AC836 User Manual

JCG AC836 User Manual Manual pdf 10 page image

JCG AC836 1200M DUAL BAND GIGABIT ROUTER10 / 78View from left to right:USB 2.0 Port10/100Mbps WAN PortLAN Port (1,2,3,4)Power SocketReset ButtonChapter 2 Connecting the router2.1 Installation Environment RequirementsOperating Temperature: 0℃~40℃ (32℉~104℉)Operating Humidity: 10%~90%RH, Non-condensingKeep the router far from any heaterAvoid direct irradiation of sunlightKeep at least 2 inches (5 cm) of clear space around the router2.2 Connecting the RouterThere are 3 connection types to choose from: Static IP, DHCP, PPPoE. If you are unsure ofyour connection method, please contact your Internet Service Provider. Please note that ifusing the PPPOE option, you will have to enter a Username and Password (provided byyour Internet Service Provider) to gain access to the Internet.JCG AC836 router supports easy setup which takes you less than 5 minutes, Netmask,Gateway, Primary DNS or Secondary DNS are NOT required during the installation process.Please follow the steps below to set up your router:1. Connect the modem to the WAN port on your router with an Ethernet cable.2. Turn on the modem.3. Turn on the router.4. Verify that the following LEDs are on and solid lit on your router.Power, 2.4G, 5G5. Check the rear of your router and make sure the 2 indicators of WAN port are blinking.