JCG AC836 User Manual

JCG AC836 User Manual Manual pdf 46 page image

JCG AC836 1200M DUAL BAND GIGABIT ROUTER46 / 78Current Time- The default time set on the router.Time Zone- Select your local time zone from the drop-down list.NTP Server- Enter the address or domain of the NTP and then the router will getthe time from the NTP Server preferentially.NTP Sync. Interval- Synchronization scheduler to synchronize your clockautomatically. The default interval for this process is 2 hours, choose your desiredinterval from the drop-down list.➢ To synchronize the time with your computer:1. Click “Sync. With Host” button.2. Select your local time zone.3. Click “Save”.➢ To set time manually:1. Enter the Date in Year-Month-Day format.2. Enter time in Hour-Minute format.3. Click “Sync. Immediately” to apply the settings.4. Select your local time zone.5. Click “Save”.➢ To set time automatically:1. Select your local time zone.2. Enter the address or domain of the NTP Server.3. Select “NTP Sync. Interval”.4. Click “Save/Apply”.Note:1. This setting will be used for some time-based functions such as signal, firewall. Youmust specify your time zone once login to the router successfully; otherwise, thesefunctions will not take effect.2. The time will be lost if the router is turned off.Chapter 14 AdvancedThere are 5 submenus under the “Advanced”: Networl, NAT, Firewall, Management andStatus. Click any of them to configure the corresponding functions.14.1 NetworkChoose menu “Advanced→Network” to create an IPv6 internet connection and set upstatic routing.