JCG AC836 User Manual

JCG AC836 User Manual Manual pdf 57 page image

JCG AC836 1200M DUAL BAND GIGABIT ROUTER57 / 78➢ Filtering Rules: Select a number from the Filtering Rules drop-down menu. JCGrouters support up to 48 filtering rules.➢ All Rules: Click this button to see details of all saved filtering rules.➢ Enable: Check or uncheck the box the enable/disable the filtering rule.➢ Comment: Choose a name for this rule.➢ Local IP Address: Enter a LAN IP address or a range of IP addresses in dotted-decimal notation format. In this example, 192.168.2.20-192.168.2.30 means all LANIP address within this range will be filtered.➢ Remote IP Address: Enter a WAN IP address or a range of IP addresses in dotted-decimal notation format. For example, 100.64.0.2-100.64.0.8 means all WAN IPaddress within this range will be filtered.➢ Protocol: Select the protocol type you want to use. (All, TCP, UDP, ICMP)➢ Local Port: Enter a LAN port or a range of LAN ports. For example: 1030-2100.Leaving these fields blank means all LAN ports will be filtered.➢ Remote Port: Enter a WAN port or a range of WAN ports. For example: 25-50.Leaving these fields blank means all WAN ports will be filtered.➢ Date: Select every day or a specific day for this filtering rule to take effect.➢ Time: Select 24 Hour or enter a range of time in HH:MM format for this filtering ruleto take effect.Modify an IP Address Filtering rule1. Select a filtering rule.2. Change its name, IP address, protocol etc.3. Click “Save” to update the rule.14.3.3 MAC FilteringYou can set MAC Address Filtering rules to limit internet access on specific computers basedon their MAC addresses. Status of the filtering rules can be viewed under “MAC Filtering”section.