JCG AC836 User Manual
                                                                              | |
Contents
| 
JCG AC836 1200M DUAL BAND GIGABIT ROUTER20 / 78Host Name- Enter a host name for your router. Some ISPs may require thisinformation. This allows some users who get IP address automatically from their ISP.For most users, this is not required.Max. Transmission Unit- The normal value for most Ethernet networks is 1500Bytes. It is not recommended that you change the default MTU Size unless requiredby your ISP.Static DNS- If your ISP gives you one or two DNS addresses, enable “Static DNS”and enter the primary and secondary addresses into the correct fields. Otherwise,disable the feature and the DNS servers will be assigned dynamically from your ISP.Click the “Save/Apply” button to save and apply your settings.6.2.3 PPPoE (DSL, PON)If your ISP provides a PPPoE connection, select PPPoE (DSL, PON) option.User Name/Password/Confirmed Password- Enter the User Name and Passwordprovided by your ISP. These fields are case-sensitive.Max. Transmission Unit- The normal value for most Ethernet networks is 1492 Bytes.It is not recommended that you change the default MTU Size unless required byyour ISP.No PPP Loopback Detection- With loopback detection feature enabled, the routercan detect loops using loopback detection packets.Service Name (Optional)- Enter the Service Name provided by your ISP.Static DNS- If your ISP gives you one or two DNS addresses, enable “Static DNS”and enter the primary and secondary addresses into the correct fields. Otherwise,disable the feature and the DNS servers will be assigned dynamically from your ISP. |
Related manuals for JCG AC836
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine