29 englishJabra GO 6470 User manUalhanging uP6.5Figure 22: Hanging upto terminate the current call when no calls are on hold, do one of the following:- For desk phones without a handset lifter or electronic hookswitch:place the desk phone handset back onto its receiver or press the desk phone headset button (if present)to terminate the call. then deactivate the audio link to the headset by doing one of the following: tap theheadset multifunction button, touch the end-call icon on the touchscreen, or dock the headset to the JabraGO base.- For all other types of phones:Tap the headset multifunction button, touch the end-call icon on the touchscreen, or dock the headset to theJabra GO base.contRolling the SPeakeR voluMe and MicRoPhone6.6the headset features a touch panel that is similar to the touch pad included with many laptop computers. Use itto adjust the volume you hear in your headset and to mute/unmute the microphone.- slide your finger up the touch panel (away from your mouth) to increase the volume.- slide your finger down the touch panel to decrease the volume.- double-tap on the touch panel to mute or unmute the microphone.2 xFigure 23: Using the volume strip and mute control
