Jacuzzi Espree Series Installation And Operating Instructions Manual

Contents

Jacuzzi Espree Series Installation And Operating Instructions Manual Manual pdf 14 page image

RapidHeat OperationOnce the heater is installed and the whirlpool pumpis operating, the heating function is totally automatic.The heater will help maintain the temperature of thewater in the bath.Vacuum SwitchThe heater is equipped with a preset vacuum switchwhich will not allow the heater to turn ON if the pump isnot running with water flowing through the whirlpoolsystem.High-Limit SwitchThe heater includes an exclusive High-Limit switch.This safety circuit will not false trip from hot tap water. Itwill only turn off the heater if the thermostat fails. Toreset, press the button. If the high-limit trips frequently,contact your dealer.Heater On IndicatorThe light will be illuminated any time the heater isoperatingControlling Whirlpool ActionThe whirlpool action in your bath is influenced by threefactors – direction of flow, force of water, and force ofair. All baths manufactured by Jacuzzi Whirlpool Bathare equipped with fully adjustable PowerPro ® jets, whichare adjustable for all three factors. Some baths haveadditional directionally adjustable jets which can beadjusted for direction and flow of air only.Direction: To change the direction of the water flow,swivel the jet nozzle to the desired angle. The jets canbe directed individually toward any location on your bodyto provide a hydromassage. The jets can also be ad-justed so that they all point in the same direction (clock-wise or counterclockwise) to circulate the water in a cir-cular motion around the bath, causing a total whirlpooleffect.DIRECTIONALLYADJUSTABLEFULLYADJUSTABLEJETSTURN CLOCKWISE TOREDUCE AIR FLOW TURN COUNTER-CLOCKWISETO INCREASE AIR FLOWAIR INDUCTION CONTROLSWater Force: The high volume, fully adjustable jetscan be adjusted to control the force of the water cominginto the bath. For robust action, increase the force ofthe flow by rotating the jet handles to the left (counter-clockwise). For a more gentle effect, rotate the handlesto the right (clockwise). Never run the whirlpool sys-tem with all the jets closed.Force of Air: Two knobs located on the bath serveas controls for the air induction system. The intensity ofthe hydromassage whirlpool action is determined by theamount of air inducted into the water. As the amount ofair is increased, the hydromassage action increases.For maximum air induction, rotate the control knobs fullycounterclockwise to the largest circles. For fewer airbubbles, decrease the amount of air induction by rotat-ing the control knob clockwise. When the knobs areturned to the smallest circles, only water is beingcirculated.OPERATIONPUSH TO RESETOVER HEATPROTECTIONHIGH LIMIT RESETHEATER ONHEATER ONBack Massage Jet - Flow Adjustment10Jacuzzi Whirlpool Bath© U961000F 12/04