Page 89J-400 Series19.8 Generic mP3 Player Operation1. Connecting Your mP3 PlayerA. Plug in any MP3 player’sheadphone output jackwith supplied cable into theauxiliary port (11) using thesupplied audio RCA cable.Close stereo compartmentduring use to preventmoisture from entering thecompartment.2. setting up The mP3Player for useA. Select preferred song/album/playlist prior to plugging inMP3 player and start playback.B. Press “Mode Button” on stereo receiver until the LCD displayreads “auX”.note: All external MP3 player playback operations are performed solelyby the MP3 Player with the exception of volume control and “ModeButton” selector, which can be controlled via wireless remote or on thestereo receiver.warnInG: rIsK OF eleCTrICal sHOCK HaZarDeXIsTs anD eQuIPmenT DamaGe! Never connect, dis-connect or operate external MP3 player while hands are wetor while sitting or standing partially or fully immersed in water!19.9 J-1000 audio system stereo Troubleshooting1. unit will not turn-onMake sure spa power is turned on, thencheck both harness fuses on side of unitmaking sure they are the proper ratings:Yellow memory B+ line (10A fuse).•When faced with a malfunction during•operation, push BND button (8) and Ejectbutton (13) at the same time to resetsoftware.With spa power off, use a paperclip to•press the reset button located besides the USB Docking Station (10)to do a hardware reset.note: It will be necessary to re-enter the radio preset memories andother personal settings after performing a reset. After resetting player,always ensure all functions are operation correctly.12 17 39875461011131512161418USB
