Page 93J-400 Series1. bonding the remote and spaWhen you first use the remote, it willneed to be bonded to the spa for opera-tional use. To bond the remote:Press button D and the Down button,•at the same time, for 2 seconds (seepage 34).The programming instructions will•appear on the LCD Display (Figure A).You will need to press these keys on•the remote unit, not the topside on thespa. In the following sequence:1. Return, up2. Return, up3. Return, up4. SelectAfter you press the Select button,•Figure B will appear on the LCDDisplay.Finally, Figure C will appear once the bonding has finished. To•clear the LCD display, press any key on the topside.2. main menuWhen any key is pressed and the remote awakes it will display the iconsthat are selectable. You can use the Navigational Quad Keypad (up,down, left or right) to navigate through the screens and make selections.By moving through the icons, they will blink to let you know that if you hitthe Select button you will activate that component or aspects of it.3. adjusting the TemperatureWhen the temperature icon is selected, all other icons on the displayscreen will disappear. The only two items shown are the thermometericon and the digit temperature in ºC or ºF. Using the Navigational Keypadyou can:121U S BAUX122iPod121122Remote display for spaswith the stereo optionRemote display for spaswithout the stereo optionREMOTE CONTROLCONNECTIONPress the keys belowReturn, upReturn, upReturn, upSelectFigure AREMOTE CONTROLCONNECTIONFigure BREMOTE CONTROLCONNECTIONEnjoyFigure CD
