50121253414 60213287oroou5312To Drop or Raise the Feed DogsThe drop feed dogs lever is located underneath the freearm bed on the back side of the machine.To drop the feed dogs, push the lever in the directionof the arrow, as illustrated.To raise the feed dogs, push the lever in the directionof the arrow, as illustrated, and turn the handwheeltoward you. Feed dogs must be up for normal sewing.17654328DarningStitch selector: 6 to 8Stitch width: 6.5Stitch length: AnyNeedle thread tension: 2 to 6Pressure adjusting lever: 0Presser foot A: Zigzag footPresser foot F: Satin stitch footFeed dogs: DroppedNOTE:If the fabric is thin or badly damaged, use a separatepiece of fabric under the hole to reinforce it.Drop the feed dogs. Center the hole in the fabric on anembroidery hoop, as shown.Lower the presser foot F and sew at a slow speed.Move the fabric back and forth slowly until the darning areais covered. Turn the fabric 1/4 turn (90∞), and sew anotherlayer of stitching over the first layer. After darning iscompleted, return the pressure adjusting lever to 3 fornormal sewing.
