Jenn-Air JES9750 Use & Care Manual

Also see for JES9750: Use & care guide Use & care guide User guide

Contents

Jenn-Air JES9750 Use & Care Manual Manual pdf 10 page image

10CancelThe CANCEL button stops any function except the Clock, Timerand Control Lock. When you press the CANCEL button, thedisplay will show the time of day, or the time remaining if theTIMER is being used.ClockTo Set Clock:1. Press SETUP.2. Select CLOCK using the left Quickset pad.3. Select TIME using the left Quickset pad.4. Enter the time using the number pads.5. Press ENTER on the number pads.6. Select AM or PM in 12-hour mode. (For 24-hour clock, seethe following.)7. To exit the Setup mode, press SETUP.Entering the Day of the Week:1. Press SETUP.2. Select CLOCK using the left Quickset pad.3. Press the right Quickset pad to scroll until DAY is displayed.4. Select DAY using the left Quickset pad.5. Use right Quickset pad to scroll through the days.6. Select the day desired using the left Quickset pad.7. To exit the Setup mode, press SETUP.To Set the Clock for a 12- or 24-Hour Format:The clock can be set to display time in either a 12-hour or24-hour format.1. Press SETUP.2. Select CLOCK using the left Quickset pad.3. Use right Quickset pad to scroll to 12/24 HOUR.4. Press the left Quickset pad to select 12/24 HOUR.5. Select 12 HR or 24 HR using the right or left Quickset pad.6. To exit Setup mode, press SETUP.Activating and Canceling the Clock/Day of Week Display:1. Press SETUP.2. Select CLOCK using the left Quickset pad.3. Press the right Quickset pad to scroll until DISABLE isdisplayed.4. Select DISABLE using the left Quickset pad.5. Select TIME using the left Quickset pad.6. Select ON or OFF using the right or left Quickset pad to turnthe clock display On or Off.Day of the week:7. Use right Quickset pad to scroll to DAY.8. Select DAY using the left Quickset pad.9. Select ON or OFF using the right or left Quickset pad to turnthe Day of the Week display On or Off.10. To exit the Setup mode, press SETUP.TimersSetting the Timers (Timer 1 or Timer 2):1. Press TIMER 1 or TIMER 2.2. Press one of the displayed times using the Quickset pads, orpress the number pads to enter the desired time.IMPORTANT: Each press of the displayed time choices addsadditional time. For example, pressing “10 MIN” three timesprovides 30 minutes on the timer (0:30).3. Press ENTER (located on the number pad).Changing the Amount of Time Entered Once the Timer Starts:1. Press TIMER 1 or TIMER 2 once.2. Press the displayed times on the Quickset pads repeatedlyuntil the desired time is entered.ORPress the number pads to enter the new desired time.3. Press Enter pad.Canceling the Timer:1. Press TIMER 1 or TIMER 2 twice.If Both Timers Are Active:If the desired Timer is already in the foreground, press once foredit mode and twice to cancel the Timer. If the desired Timer isnot in the foreground, follow these steps:1. Press the desired TIMER pad once. The selected Timer willcome to the foreground.2. Press TIMER a second time to access the edit mode in orderto make changes.3. Pressing TIMER a third time will cancel the Timer.Changing the Timer Beeps:The signal beeps for TIMER 1 and TIMER 2 can be changed. Theoptions available are 2 beeps every 30 seconds, 2 beeps every60 seconds or 1 beep only. The default setting is 1 beep.1. Press SETUP.2. Use right Quickset pad to scroll to TONES.3. Select TONES using the left Quickset pad.4. Use right Quickset pad to scroll to TIMER TONES.5. Select TIMER TONES using the left Quickset pad.6. Use right Quickset pad to scroll to the desired timer beepformat (2-30 SEC, 2-60 SEC or 1 BEEP).7. Select the desired timer beep using the left Quickset pad.8. Press SETUP to exit Setup mode.Locking the Oven Control and Oven DoorThe lock feature shuts down the control pads (buttons) and locksthe oven door to avoid unintended use of the oven.The lock feature is preset unlocked, but can be locked.If the oven is currently in use, the controls and oven door cannotbe locked.To Lock the Oven Control and Oven Door:Press and hold BACK and ENTER for 3 seconds or until“CONTROL LOCKED” appears in the display.To Unlock the Oven Control and Oven Door:Press and hold BACK and ENTER for 3 seconds. “UNLOCKINGDOOR” will appear in the display when the control and door areunlocking.