Jenn-Air PRO-STYLE JDRP430 Use & Care Manual

Contents

Jenn-Air PRO-STYLE JDRP430 Use & Care Manual Manual pdf 17 page image

17OVEN USEOdors and smoke are normal when the oven is used the first fewtimes, or when it is heavily soiled.During oven use, the heating elements will not remain on, but willcycle on and off throughout oven operation.IMPORTANT: The health of some birds is extremely sensitive tothe fumes given off. Exposure to the fumes may result in death tocertain birds. Always move birds to another closed and well-ventilated room.Aluminum FoilIMPORTANT: To avoid permanent damage to the oven bottomfinish, do not line the oven bottom with any type of foil or liner.■ For best cooking results, do not cover entire rack with foilbecause air must be able to move freely.■ To catch spills, place foil on rack below dish. Make sure foil isat least ½" (1.3 cm) larger than the dish and that it is turnedup at the edges.Positioning Racks and BakewareIMPORTANT: To avoid permanent damage to the porcelainfinish, do not place food or bakeware directly on the oven door orbottom.RACKS■ Position racks before turning on the oven.■ Do not position racks with bakeware on them.■ Make sure racks are level.BAKEWARETo cook food evenly, hot air must be able to circulate. Allow2" (5.0 cm) of space around bakeware and oven walls.Extendable Roller RackThe extendable roller rack allows easy access to position andremove food in the oven. It can be used in rack positions 1through 4. The extendable roller rack will not fit in position 5.Open PositionClosed and Engaged PositionTo Remove the Extendable Roller Rack:1. Slide the rack in completely so that it is closed and engagedwith the sliding shelf.2. Using 2 hands, lift up on the front edge of the rack and thesliding shelf together. Slowly push both to the back wall of theoven so the front edge of the sliding shelf sits on the rackguide located on the sides of the oven.The front edge of the rack and the sliding shelf should behigher than the back edge.3. Using 2 hands, lift up the back of the rack and the slidingshelf so that the back and front are level on the rack guide.4. Pull the rack and the sliding shelf out.To Replace Extendable Roller Rack1. Using 2 hands, grasp the front of the closed rack and thesliding shelf. Place the closed rack and the sliding shelf onthe rack guide.2. Slowly push the rack and the sliding shelf to the back of theoven until the back edge of the sliding shelf drops.A. Extendable roller rackB. Sliding shelf12345ABA. Extendable roller rackB. Sliding shelfA. Sliding shelfB. Rack guideC. Extendable roller rackBABAC