Jenn-Air W10253462A User Manual

124. Draw and cut a 6¼" (15.8 cm) diameter hole (option 1 shown).5. Position blower motor in cabinet opening and mount blowermotor to the floor.6. Connect vent system to blower motor outlet (option 1 shown)with 4 - #8 x ¾" hex head screws provided.7. Go to the “Electrical Connection” section.Left or Right Side Venting1. Mark cabinet side for either a left or right side vent holelocation.2. Mark and cut a 5½" (13.9 cm) diameter hole in the desiredcabinet side.3. Mark and cut a 14" x 11" (35.6 x 27.9 cm) opening in the floorof the same cabinet as the vent hole opening.A. Option 1B. Option 2Top ViewOption 1 Option 2A. Inlet from rangeB. Exhaust outletA. InletB. Vent clampC. FloorD. Vent systemA BAABBABC DA. 31³⁄₁₆" (79.2 cm) to top of cabinetB. 18" (45.7 cm) from back wallA. 5½" (13.9 cm) diameter holeTop ViewA. 11" (27.9 cm) from front of cabinetB. 14" (35.6 cm) from left side of cabinetA BAAB