2110. Depending on your installation, connect the flexible vent fromthe blower motor inlet to the range using a vent clamp.Wall VentingFloor VentingSide Venting (left side venting shown)Connect flexible vent duct to range and connect vent systemto blower motor outlet.Verify Anti-Tip Is Installed and Engaged1. Verify the anti-tip bracket is installed and engaged.■ Use a flashlight to look underneath the bottom of therange.■ Visually check that the rear foot is inserted into the slot ofthe anti-tip bracket.2. Replace access panel.Top ViewA. RangeB. Wall venting outletC. Vent clampTop ViewA. RangeB. Floor venting outletC. Vent clampABCCABTop ViewA. Flexible vent duct to rangeB. Vent clampC. RangeD. Vent systemE. Side venting outletBLOWERBECADel.
