Jet JWDP-12 Operating Instructions And Parts Manual

Contents

331. Maintain tools with care. Keep drill bits sharp andclean for the best and safest performance. Followinstructions for lubricating and changingaccessories.32. Disconnect tools before servicing; when changingaccessories, such as blades, bits, cutters and thelike.33. Make sure the work piece is securely attached orclamped to the table. Never use your hand to holdthe work piece.34. Turn off the machine before cleaning. Use a brushor compressed air to remove chips or debris — donot use your hands.35. Do not stand on the machine. Serious injury couldoccur if the machine tips over.36. Never leave the machine running unattended. Turnthe power off and do not leave the machine until itcomes to a complete stop.37. Remove loose items and unnecessary work piecesfrom the area before starting the machine.Familiarize yourself with the following safety notices used in this manual:This means that if precautions are not heeded, it may result in minor injury and/or possiblemachine damage.This means that if precautions are not heeded, it may result in serious injury or possibly evendeath.SAVE THESE INSTRUCTIONS.2.0 About this manualThis manual is provided by JET covering the safe operation and maintenance procedures for a JET JWDP-12 DrillPress. This manual contains instructions on installation, safety precautions, general operating procedures,maintenance instructions and parts breakdown. Your machine has been designed and constructed to provideconsistent, long-term operation if used in accordance with the instructions set forth in this document.If there are questions or comments, please contact your local supplier or JET. JET can also be reached at our website: www.jettools.com.Retain this manual for future reference. If the machine transfers ownership, the manual should accompany it.Read and understand the entire contents of this manual before attempting assembly oroperation! Failure to comply may cause serious injury