Jet JWDP-12 Operating Instructions And Parts Manual

Contents

54.0 SpecificationsModel Number ......................................................................................................................................... JWDP-12Stock Number ............................................................................................................................................. 716000Swing .............................................................................................................................................. 12 in. (305mm)Type ....................................................................................................................................................... Bench TopDrilling Capacity ............................................................................................................................... 5/8 in. (16mm)Chuck Size ................................................................................................................................. 5/8 in. (0.8-16mm)Spindle Travel ............................................................................................................................... 3-1/8 in. (80mm)Spindle Distance to Base .......................................................................................................... 23-3/8 in. (593mm)Spindle Distance to Table (max.) ................................................................................................. 17 in. (431.8mm)Table Size Diameter (width x depth) ....................................................................... 9-1/2 x 9-1/2 in. (243x243mm)Table Tilt .................................................................................................................................................. + or - 45°Spindle Taper ................................................................................................................................................... MT2Column Diameter .......................................................................................................................... 2-1/2 in. (65mm)Number of Spindle Speeds ........................................................................................................................ VariableRange of Spindle Speeds ............................................................................................................... 530-3100 RPMLight Bulb ................................................................................................................................................ 40W max.Overall Height ................................................................................................................................. 37 in. (940mm)Base Size .................................................................................................................. 10 x 16-1/8 in. (252x410mm)Motor ............................................................................................................. 115V only, 1/3HP, 1 PH, 5.0A, 60HzNet Weight (approx.) .......................................................................................................................... 85 lb. (38 kg)Shipping Weight (approx.) .............................................................................................................. 92.5 lb. (42 kg)The specifications in this manual are given as general information and are not binding. JET reserves the right to effect,at any time and without prior notice, changes or alterations to parts, fittings, and accessory equipment deemednecessary for any reason whatsoever.Read and understand the entire contents of this manual before attempting assembly oroperation! Failure to comply may cause serious injury!