Contents - pressure washer
- Machine Data Label
- Table Of Contents
- how to use this manual
- important safety information
- Propane Tank Safety Instructions
- Component Identification - All Models
- Installation HDS 6.3/32, 8.0/32, 9.5/30
- gas piping
- Pipe Sizing Chart for Natural Gas
- Room Vents for Combustion and Ventilation Air
- water source
- Gas Valve Replacement
- for your safety
- check list before starting
- assembly instructions
- operating instructions
- Operating Techniques
- after extended storage
- Maintenance
- unloader valves
- Gas Valve Regulator Adjustment
- propane gas
- Burner Basic Facts
- oil change record
- preventative maintenance
- troubleshooting
- HDS 3.5/20, 4.0/22, 3.9/30, 5.0/23, 4.8/30 Frame
- HDS 3.5/20, 4.0/22, 3.9/30, 5.0/23, 4.8/30 Burner
- HDS 3.5/20, 4.0/22, 3.9/30, 5.0/23, 4.8/30 Coil
- HDS 6.3/32, 8.0/32, 9.5/30 Frame
- HDS 6.3/32, 8.0/32, 9.5/30 Burner
- HDS 6.3/32, 8.0/32, 9.5/30 Coil
- HDS 3.5/20, 4.0/22, 3.9/30, 5.0/23, 4.8/30 Float Tank
- HDS 6.3/32, 8.0/32, 9.5/30 Float Tank
- HDS 3.5/20, 4.0/22, 3.9/30, 5.0/23, 4.8/30 Pump
- HDS 6.3/32, 8.0/32, 9.5/30 Pump
- HDS 3.5/20, 4.0/22, 3.9/30, 5.0/23, 4.8/30 Tensioner
- HDS 6.3/32, 8.0/32, 9.5/30 Tensioner
- Tensioner Torque Specs & Assembly Parts
- HDS 6.3/32, 8.0/32, 9.5/30 Electrical Box
- Panel
- HDS 6.3/32, 8.0/32, 9.5/30 Control Panel
- Doors
- HDS 6.3/32, 8.0/32, 9.5/30 Panels & Doors
- Hose & Spray Gun
- Specifications
- Motor
- Controls
- VRT3 Unloader
- vrt3 unloader
- VRT100 Unloader
- HDS 4.0/22, 3.9/30 M.3 Series Pump
- HDS 5.0/23, 4.8/30, 6.3/32 KT.2 Series Pump
- HDS 8.0/32, 9.5/30 X.2 Series Pump
- HDS 3.5/20 KB Series Pump
| 
2 Karcher Liberty HDS Stationary Dealer’s Manual 9.801-508.0 - AYMachine Data LabelPump SwitchVoltageWhen the light is on, it means power supply is onHour MeterBurner SwitchSteam CombinationDetergentIdentification of Operational Label SymbolsNot all machines have all symbolsMotor OverloadWhen the light is on, it means the overload is tripped.Reset overload.Pilot LightWhen the light is on, it means there is power to the pilot control.If there is no light, see troubleshooting guide. |
