34 AEJ_N/AES_N-BA-e-13219 Weighing functions P6 func9.1 Turn on/off balance The weighing scale will carry out a self-test after having been connected to thepower supply and will then automatically go into weighing mode. To switch off pres the ON/OFF-key; “oFF“, will be displayed. The balance isnow in stand-by mode No warming-up up time is required and it will be ready foroperation immediately after switching on (Press ON/OFF-key). To switch-off the balance completely, separate balance from power supply.9.2 WeighingA warm-up time is required for stabilisation (see chap. 1). Check zero display [ ] and set to zero with the help of the TARE key, asrequired. Place the goods to be weighed and close the wind screen doors Wait until the stability display appears ( ). Read weighing result.When an optional printer is connected, the weighing value can be edited.Printout example (KERN YKB-01N):Date : 23/07/12Time : 09:16User Id : KERNProject Id : ABCBalance Id : 35093819.999[3] g The non-calibrated value is given inbrackets in calibrated scales.
