CB/FCB-BA-e-0640207.11 Animal weighing functionThe animal weighing function can be applied for busy weighings. This setting findsout an average weighing value over a defined period of time.In the menu the time can be set which is necessary to find out the average value.Proceed as follows:Switch-on the balance using the key and wait for the „0“ display.Press the key and keep it pressed until „UNIT“ appears on the display.Press the key eight times, in the display appears „ANL“.Confirm by pressing the key. Use the key to choose between thefollowing settings:Display Adjustment„ANL“ 3 Average value found out after 3 seconds„ANL“ 5 Average value found out after 5 seconds„ANL“ 10 Average value found out after 10 seconds„ANL“ 15 Average value found out after 15 seconds„ANL“ Off Animal weighing not activeUse the key to confirm the selected setting.Operation:Switch-on the balance using the ON key and wait for the „0“ display.Put the weighing good (animal) on the weighing plate and press the key. In thedisplay the preselected time is displayed in seconds and then is counted towardszero. During this time the balance takes up several measuring values. Whenreaching „0“ sounds an acoustic signal and the calculated weighing value isdisplayed.By pressing the key several times, the balance returns to the normal weighingmode.Repeated pressing of the key activates this function anew.