CB/FCB-BA-e-0640 258.5 Interface RS232CData output via interface RS 232 CGeneral InformationThe previous condition for the data transfer between balance and a peripheral device(e.g. printer, PC ...) is that the appliances are set to the same interface parameters(e.g. baud rate, transfer mode ...).8.5.1 Data transfer modeSetting of data transfer mode Balance display1. Keep the key pressed until „Unit" is displayed. Unit2. Press key, „Pr“ appears. Pr3. To change the setting, press the key. Pr PC4. The mode can be converted using the key(Pr PC; AU PC; AU Pr ; re Cr ; BA Pr ;details chapter 9.4).AU Pr5. The changed setting is taken over by pressingthe key.6. The balance returns to the weighing mode. 0.0 g8.5.2 Baud rateThe baud rate necessary for the measuring values transfer can be set.In the following example the baud rate is set to 9600 baud.Setting of baud rate Balance display1. Keep the key pressed until „Unit" is displayed. Unit2. Press key Pr3. Press key, „baud“ appears. Baud4. Confirm by pressing the key 48005. The baud rate can be changed using the key (1200,2400, 4800, 9600, 19200). 96006. The changed setting is taken over by pressingthe key.7. The balance returns to the weighing mode. 0.0 g