CFS/CCS-BA-e-1220 4711.4 Counting with counting system(Display example) Bulk material balance e.g. KERNKFPReference balance KERN CFSHere pieces of huge quantities willbe counted.Due to its high resolution it is usefulfor accurate determination of theaverage piece weight.Big parts (max > 3kg) are countedon the weighing bridge.Smallest parts (max < 3kg) arecounted on the precise KERN CFS.If in the determination of theaverage piece weight no suchhigh resolution is asked for as thatof the KERN CFS, the referenceformation can also be made in thebulk material balance.Counting with bulk material balance:1. On the reference balance KERN CFS set average piece weight, see chap. 11.1.or chap. 11.2.2. Switch over balance with (s. chap. 9.3)3. Put empty vessel on the weighing plate of the bulk material balance KERN KFPand tare.4. Fill counted quantity in the vessel on the bulk material balance. The piecenumber is shown in the display.In order to avoid errors at the piece number determination, both balancesmust be adjusted with the same acceleration due to gravity (see chap. 7). Incase of non-compliance counting errors will result!
