PES/PEJ-BA-defsi-0510 127Use the F key to switch from net weightto gross weight or vice versaThis procedure may be repeated anynumber of times (max. weighing range ofthe balance).250z0 gNet350z0 gB/G10.2. Parts countingWith parts counting you can either count parts into a container or remove parts froma container. To count a greater number of parts the average weight per part has tobe determined with a small quantity (reference quantity). The larger the referencequantity, the higher the counting exactness. High reference must be selected forsmall parts or parts with considerably different sizes.The process has four steps:Tare the weighing containerDetermine the reference unitWeigh in the reference unitCount the itemsOperation DisplayActivate function [q SET. 2](see chapter 7).The display shows the piece countingsymbol "Pcs".q SET 2z0PcsIf you are using a weighing con-tainer
