KERN PLE Operating Manual

Contents

KERN PLE Operating Manual Manual pdf 9 page image

PLE-BA-e-0812 94 Basic Safety Precautions4.1 Pay attention to the instructions in the Operation ManualCarefully read this operation manual before setup and commissioning, even if youare already familiar with KERN balances.4.2 Personnel trainingThe appliance may only be operated and maintained by trained personnel.5 Transport and storage5.1 Testing upon acceptanceWhen receiving the appliance, please check packaging immediately, and theappliance itself when unpacking for possible visible damage.5.2 PackagingKeep all parts of the original packaging in case you need to return the appliance.Only use original packaging for returning.Before sending, disconnect all connected cables and loose/movable parts.Attach possibly existing transport safeguards. Secure all parts, e.g. weighing plate,power unit etc., to prevent slipping and damage.6 Unpacking, Setup and Commissioning6.1 Installation Site, Location of UseThe balances are designed in a way that reliable weighing results are achieved incommon conditions of use.You will work accurately and fast, if you select the right location for your balance.Therefore, observe the following for the installation site:• Place the balance on a firm, level surface;• Avoid extreme heat as well as temperature fluctuation caused by installingnext to a radiator or in the direct sunlight;• Protect the balance against direct draughts due to open windows and doors;• Avoid jarring during weighing;• Protect the balance against high humidity, vapours and dust;• Do not expose the device to extreme dampness for longer periods of time.Non-permitted condensation (condensation of air humidity on the appliance)may occur if a cold appliance is taken to a considerably warmer environment.In this case, acclimatize the disconnected appliance for ca. 2 hours at roomtemperature.• Avoid static charge of goods to be weighed or weighing container.