Kaiser HGG 5 Series User Manual
                                                                                | |
Contents
| 
12EN123ADJUSTMENT TO DIFFERENT GAS TYPESThe cookers are supplied with gas burners which themanufacturer has adjusted to natural gas used inyour country. The type of gas is specified on the dataplate as well as in the warranty of quality. The dataplate is to find on the base or on the back of theooker.To adjust gas burners, remove knobs of the gasburners.To adjust the gas burners of the oven, withdraw thebottom of the oven cavity.To adjust the cooker to another type of gas: replace a nozzle (see table 1), adjust the lowerer pressure of the valves adjust air supply to the gas burners of the oven.1 – To replace the nozzle: screw out the nozzle (usescrew tip N° 7) and replace it with another one incompliance with the available type of gas (see thetable 1).2 – To adjust the burners: Switch on gas and select“Sparing flame”. For adjustment, use a 2,5 mm-screwtip.3 – To replace the nozzle in the oven: See table 1 “a”to adjust air supply correctly.Table 1Type ofgasBurner: type / diameter «»Small Normal Big OvenNatural gas 0,75 1,09 1,24 1,3 3Liquid gas 0,52 0,67 0,84 0,84 10GassupplyAdjusting from liquidgas to natural gasAdjusting from naturalgas to liquid gasFullflameNozzle burner 1Replace in compliancewith Table 1Nozzle burners 1Replace in compliancewith Table 1SavingflameRegulating needle 2Screw out slightly andadjust the flame sizeAdjusting needle 2Screw in against thestop and check up gassupplyAttention! (A hint for the serviceman) Theadjustment of the cooker to another gas typeshould be registered at the connectionplace.Issue and attach a label with the gas typewhich the cooker has been adjusted to. |
Related manuals for Kaiser , HGE 60508
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine