16FCC Declaration of Conformity:NOTE: This equipment, Kantronics‘ KPC–3 Plus, has been tested and found to complywith the essential emission and immunity requirements of the EMC Directive FCC Title47, Part 15, Subpart B. The test results are on file at the corporate offices of Kantronics.Type of Equipment: Information Technology EquipmentClass of Equipment: Class BCE Marking ConsiderationsThe following cautions pertain to CE Marking of this product:All cables connecting to DC IN, PORT 1 (VHF), and COMPUTER must be 3 min lengthA cable for GPS or telemetry (control output or A/D input) connected to theCOMPUTER port may be 3 m in length.All cables, except for the DC IN port, must be shielded with the shield properlyterminated 360 to the connector. See note 2 in the RF Interference sectionThe nominal 12 V dc power must be supplied from a CE marked or third partyapproved power brick (wall wart) or ac to dc power supply. If a homemade powersupply is used the components making up the supply must meet IEC/ENstandards for such components.
