Kantronics KPC–3 Plus User Manual
Also see for KPC-3 Plus: User guideUser guideManual
                                                                                                                                                                                                                                            | |
Contents
| 
60Step 3. The KPC-3 Plus will send a short ―HELP‖ message about the command, fordisplay on your monitor.View Current Values of ParametersTo see the current value of parameter(s) for any variable (other than the ―immediate‖commands, like CONVERS, that are simple actions, not settings):Step 1. Go to COMMAND mode, as described above (if you are not already there).Step 2. Type the name of the command for which you want to see current parametervalue(s).Step 3. The KPC-3 Plus will send a message consisting of the name of the commandand the value(s) of its parameters for display on your monitor. For example, ifyou type INTFACE, you will see INTFACE NEWUSER if you are currently inthe NEWUSER mode.As explained in the ―Command Reference‖ chapter, the DISPLAY command can beused to see current values of selected sub-sets of commands.Change the Value of a ParameterTo change the current value of parameter(s) for any variable (other than the―immediate‖ commands, like CONVERS, that are simple actions, not settings):Step 1. Go to COMMAND mode, as described above (if you are not already there).Step 2. Type the name of the command for which you want to change the currentparameter value(s), type one or more spaces, and enter the new value(s) youwant for the parameter(s) for the command.Step 3. The KPC-3 Plus will immediately change the value(s) to the values(s) youhave just entered.If you enter a value that is not possible (e.g., INTFACE MOON), you will get an errormessage (―EH?‖).To confirm that the current value(s) is what you want, enter the name of the commandand press ENTER. The KPC-3 Plus will send a message consisting of the name of thecommand and the current value(s) of its parameter(s) for display on your monitor.Connect to Your MailboxYou are now ready to try your first connect.A good first connect (which also shows you an important part of your KPC-3 Plus), is tosimply connect to your own personal mailbox, built in to the KPC-3 Plus:This is an internal connect, so your radio does not need to be connected. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine