Kawai Digital Piano CE200 Owner's Manual

50KAWAI DIGITAL PIANO CE200Jacks7. JACKSMIDI J ACKSThese jacks are used to connect external MIDI devices with the CE200piano.There are two terminals: MIDI IN and MIDI OUT.USB J ACKThis jack is used to connect with a personal computer and exchange MIDIdata.When the CE200 piano is connected to a computer via a commerciallyavailable USB cable, the CE200 piano will be recognized as a MIDI device.As with a regular MIDI interface, the CE200 piano will be able to transmitand receive MIDI messages.There are A USB port and B USB port. Connect a computer to the A portand digital piano to the B port.ABOUT A USB DRIVERFor data exchange between a computer and digital piano via USBconnection, software (USB-MIDI driver) must be installed on the computerfor proper digital piano operations.Please read the following instructions carefully as a different USB-MIDIdriver may be necessary depending on the computer OS.Windows XP / Me users:The standard USB-MIDI driver installed on Windows will be used. ThisUSB-MIDI driver will be automatically installed when the unit is connectedto the computer.To establish MIDI communications with the unit by using an application,select "USB audio device" to define the unit as a MIDI device.Windows 2000 / 98SE users:You need to install the specifi ed, special USB-MIDI driver. Download thespecial USB driver from the KAWAI site as shown below, and install it onthe computer.http://www.kawai.co.jp/download_demo/driver/Read the instruction manual thoroughly before connecting the unit to the