Source Control ScreenSwitches to the source control screen to usevarious functions.Display the Source1 Control ScreenSee Screen>.Operation on the2 Source Control screen111[FM] Switches to the FM1/2/3 band.[AM] Switches to the AM band.[4], [¢] Tunes in a station.Use the [SEEK] to change the frequencyswitching.Multi Function[CRSC] FMFM Turns the CRSC function Onor Off.[SEEK] Switches the Seek mode.The mode is switched in the following ordereach time you touch the button.Display Setting"AUTO1" Tunes in a station with good receptionautomatically."AUTO2" Tunes in stations in memory one after another."MANU" Switches to the next frequency manually.2 sec.Continue to touch until the memory numberappears.Next page 34 DNX9140/DDX814/DDX8034BTHow to read this manualThis manual uses illustrations to explain itsoperations.The displays and panels shown in this manualare examples used to provide clear explanationsof the operations.For this reason, they may be different from theactual displays or panels used, or some displaypatterns may be different.The above operation example with the markdiffers from the actual operation.SSShShShShShorortttt PPPrPresesssPrePrePrePrePrePrePrePP ssssssssssss thethethethethethe bubububububuttottottottottottonnnn,n,n,,, dendendendendendenoteoteoteoteoteoted bd bd bd bd bd byyyyyyyyy ...CCCChChange in the screenWitW h each operation, the screen changes inthetheththtt ororderder shshownown hehere.re.CCContinue to the next pageThe instruction continues to the next page.Make sure to flip the page for the rest of theinsii truction.SSelecting a screen itemSelect and choose an item on the screen.Select the item by touching the button on thesscreen.∞∞∞ : Continues to the next line.¶¶¶¶ : Ends here.
