English 47The screen has changed to the Tuner Controlscreen.You will hear a beep again.Control the source with voice control4Repeat the same procedure as step 2 or 3.For information on the recognizable voicecommands, refer to (separate volume).End the voice control mode5Press the TALK switch.⁄• The voice control is disabled while operating the hands-free phone.• The voice control is disabled when is displayed on theupper-right corner of the screen.• The voice control is canceled when the screen is touchedor any of the buttons, except the [VOLUME] button, onthe front panel or the remote control unit is pressed.• The voice control is disabled while using your cell-phonewith hands-free.• The voice control is canceled if no operation is continuedfor a certain period of time.Tips for voice commandThe voice recognition icons are displayed onthe operation buttons on the screen when thevoice control mode is turned on. The icons aredivided into two types: the number icon (suchas ) for the list buttons, and the icon for theoperation buttons. The command name may bedisplayed.Voice Control (DNX9140 only)The unit is equipped with Automatic Speech Recognition function which allows you to operate it with yourvoice. The supported languages are US English, UK English, French, German, Dutch, Italian, and Spanish. Forinformation on the recognizable voice commands, refer to (separate volume)• ASR on the Language Setting screen should be set to "Enabled" See (page 68).Voice ControlEnter into the Voice control mode1Press the TALK switch.The voice recognition icons will be attached tothe buttons supporting the voice control.Speak the command2Speak the command. (Ex: Speak "Source Select".)You will hear a beep.The screen has changed to the Source Controlscreen.You will hear a beep again.Speak the command3Speak the command. (Ex: Speak "TUNER".)You will hear a beep.
