70 DNX9140/DDX814/DDX8034BTSecurity SetupYou can set a security code to protect yourreceiver system against theft.⁄• When the Security Code function is activated, the codecannot be changed and the function cannot be released.Note the Security Code can be set as the 4 digit numberof your choice.Display the Security screen1Touch [ ] > [ ] > [System] > [Security].(page 66)Setup the SI (Security Indicator)2[Security Code Set] Displays the Security codeinput screen.[SI] Turns the SI function on or off.If turned "ON", the SI indicator on the frontpanel flashes when the vehicle ignition is off.( "ON")Start Security Code setup3⁄If you have already completed the code registration,•[CLR] is displayed.Enter a security Code4Input four-digit number.Register your security code5Reenter the security code6Reenter the same security code as that you haveentered in Step 4 for confirmation.⁄If you enter a different security code, the screen•returns to Step 4 (for the first code entry).Register the security code again7Now, your security code is registered.If you have pressed the Reset button or if youhave disconnected the Receiver from battery...Enter the correct security code1You must enter the same security code as thatyou have entered in Step 4.Register your security code2Now, you can use your Receiver.Setup Menu
